|
Step 1. To make napkin, turn under 1/8"
along raw edges of blue teacup print 19 1/2" square; press.
Turn pressed edge under 1/4" and topstitch. Make 2 napkins.
Step 2. For napkin ring, refer to Diagram
I. Fold green plaid 3" x 6 1/2" strip in half lengthwise,
right sides together. Stitch 1/4" from raw edge. Turn right
side out. Press from raw edge. Turn right side out. Press tube
flat, centering seam. Turn one end of tube inside 1/4"
and press. Slide raw end through opening in pressed end; pin
and hand stitch together. Make 2
Step 3. To complete napkin rings, refer
to Finishing Touches and make 2 pink plaid yo-yos. Position
yo-yo on napkin ring seam, add button and stitch in place.
Diagram I |
|
Step 1. Add Satin-stitched Vine
Refer to photo of project and use pencil to lightly mark continuous
wavy line for vine on ivory fabric. Using green threads (cotton in
bobbin and rayon in needle), machine satin stitch along pencil line.
Step 2. Fuse the Leaves
Trace Template B on paper side of paper-backed fusible web. Cut apart,
leaving small margin beyond drawn line. Following manufacturer's instructions,
fuse to wrong side of appropriate fabric; cut apart on drawn line.
Referring to table runner Assembly Diagram for placement, position
template fabrics along vine. Following manufacturer's instructions,
fuse in place. Using tight machine satin stitch and coordinating thread,
appliqué edges.
Step 3. Make Yo-yos Fold under
1/8" on outer edge of Template A fabric and hand sew a running stitch
as shown in Diagram I-A. Pull end of thread to gather circle into
yo-yo (see Diagram I-B) and knot off to secure. Center button on yo-yo
and stitch button and yo-yo to project.
Diagrams IA and I-B
Bonus
Patterns Index
