2 Hot Mitts Designed by Michele Crawford for Coats & Clark Accompanying Table Decor patterns can be found in the September 2004 issue of McCall's Quick Quilts. You Need: Blue beverage print 1/2 yd. Green dot (lining, bias binding) 1 yd. Insul-bright™ insulated batting 1/2 yd. Plan Insul-Bright™ is the perfect product for use in hot mitts and pot holders. It's manufactured by The Warm Company and is available at fabric stores and quilt shops. Cut Blue beverage print ... 2/2R Template A Green dot ... 2/2R Template A Insul-bright™ insulated batting ... 4 Template A Download Template Diagram Sew Step 1. Layer 1/1R blue print Template A fabrics, right sides together, on 2 Insul-brite™ Template A fabrics (see Diagram I). Using 1/2" seam allowance, stitch around edges, leaving opening as shown (Diagram II). Clip inside curves, trim seam allowance and turn right side out to make mitt. Diagram I Diagram II Step 2. In same manner, layer 2 green dot Template A fabrics right sides together and stitch, clip and trim to make mitt lining. Do not turn. Step 3. Place green lining inside mitt (Diagram III), matching top edges and seams. Bind with bias-cut green dot fabric (See Basic Quiltmaking Instructions). Make 2 mitts. Diagram III